Home » Heyco-Flex™ Mounting Brackets

Heyco-Flex™ Mounting Brackets

Heyco Products

Liquid Tight Tubing, Electrical Conduits & Nylon Conduit Fittings
Right Angle Fittings PG | Right Angle Fittings NPT | Flex I-Fittings | Flex II-Tubings | Flex V-Slit Tubing | FlexNylon Snap-In | FlexNylon Straight | FlexNylon Sweep | Flex III Halogen Free Straight | Flex IV Nylon Straight/Snap-In | Flex Mounting Brackets/Knock-Out Seals | Sealing Washers | Liquid Tight Straight-Thru Fittings | Liquid Tight Straight-Thru Fittings For Flexible Cords | Liquid Tight Pigtail Fittings | Liquid Tight Pigtail Fittings For Flexible Cords | Steel Straight Connectors - PG Thread Caps | Metal Cord Grip Fittings | PG Hub Liquid Tight Fittings - Labkit | Straight Quick Twist Connector (snap and NPT threaded) |
Sweep Quick Twist Connector (snap and NPT threaded)

Heyco-Flex™ Mounting Brackets
Heyco-Flex™ Mounting Brackets
Swipe
Fits Conduit
Tubing
Trade Size		 Part No. UL/CSA
Description		 A
Mounting Hole Dia.
in.
mm.		 B
Max. O. A.
Length
in.
mm.		 C
Body
Length
in.
mm.		 D
Head
Thickness
in.
mm.		 E
Head
Diameter
in.
mm.
3/8 1025 HFB 3/8 .71
18,0		 .96
24,4		 .67
17,0		 .94
23,9		 .75
19,0
1/2 1027 HFB 1/2 .84
21,3		 1.07
27,1		 .68
17,3		 1.09
27,7		 .75
19,0
3/4 1029 HFB 3/4 1.05
26,7		 1.27
32,2		 .67
17,0		 1.31
33,3		 .75
19,0
1 1031 HFB 1 1.32
33,5		 1.53
38,9		 .84
21,3		 1.59
40,4		 .75
19,0
Heyco®Liquid Tight Knock-out Seals Underwriters Listed under Underwriters' Labatroies File #E-28430
Canadian Standards Association CSA Certified by Canadian Standards Association File #LR-81067.
 
  • For mounting Heyco-Flex I Conduit or Heyco -Flex II nylon tubing securely into place-vertically or horizontally.
  • Only fingertip pressure is required to snap conduit tubing into bracket.
  • Low profile design for space saving and pleasing appearance.
  • Recommended distance between nylon fastener brackets at intervals not greater than 3 feet (914mm) as required by Article 351-27 of 1996 NEC.
  • Use one standard #10 (4-5M) screw for attaching nylon fastener bracket to panel or chassis (screw not included).
  • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
  • Nylon fasteners are molded of type 6/6 nylon. ASTM D-4066-82; flammability classification 94V-2; temperature index 125°C.
  • Oil tight, rain tight, submersible.
  • Three trade sizes fit 1/2" to 1" knock-out holes.
  • Locks firmly in boxes from .030"(0,8mm) to .125"(3,2mm) thick.
  • Installs quickly with fingertip pressure (no tool required).
  • Molded of Santoprene 251-80.  Flammability classification 94V-0.
Swipe
Maximum Thickness
in.        mm.		 Mounting Hole Diameter
in.     mm.

Part No.

Description B
Head Diameter
in.          mm.		 C
Overall
Height
in.        mm.		 A
Head
Thickness
in.      mm.

.125        3,2

 .875   22,2 3833 KOS-LT 1/2 1.281    32,5 .500       12,7 .359        9,1

.125        3,2

 1.093  27,8 3835 KOS-LT 3/4 1.531    38,9 .546       13,9 .390      9,9

.125        3,2

 1.375  34,9 3837 KOS-LT 1 1.796    45,6  .562       14.3 .421     10,7

Standard Color: Black

Our website uses cookies. For more information on our cookie use, see our Privacy Policy. By continuing to use this website you agree to our use of these cookies.